Course Questions Drone Building

About the Drone Building category (1)

Navigation lights recommendations? (3)

Pixhawk 4 only powered through USB? (1)

Connecting ESC power wire to Navio 2 servo rail (8)

Converting a Navio2 drone build to Pixhawk (11)

Motor won’t spin right but will spin left (2)

Mission Planner Reading Voltage lower than actual (5)

Unable to locate IP address (3)

GCS for MacOS (4)

GPS Horizontal POS Error too High (4)

Ssh to the pi out in the field (3)

I received 4 CW motors (6)

UART telemetry module won't fit navio2 (6)

Navio2 anti-vibration board (5)

Drone Takes Off but Shakes and Crashes (Navio) (5)

Having trouble with getting drone to start up/binding receiver (4)

Navio2: Blinking yellow (6)

Raspberry Pi Power (5)

Calibrating ESCs (5)

Pixhawk (8)

YAW Drift on new Build (6)

Wpa_supplicant.conf (14)

No led on receiver when attempting esc calibration (14)

Calibrating the ESC (10)

Takeoff_and_land (9)

GCS for Raspberry Pi Drone kit? (2)

Calibrating ECG's with Motor attacheded FAILLED (1)

Will this Battery/ESC/Motor combo work? (5)

I Got Telemetry Radios Messed Up (11)

Servos on the drone (4)