PixHawk 2.4.8 Firmware Update Failure [Drone Building] (2)
Estimated Delivery Time [Drone Building] (2)
launchSitl "can't find '__main__' in module in ' ' error ( 2 ) [Drone Programming] (26)
dronekit.TimeoutError: wait_ready experienced a timeout after 30 seconds and WARNING: dronekit: Link timeout, no heartbeat in last 5 seconds ERROR When trying to connect 5 drones using com connection [Drone Programming] (4)
Access to Drone Building Video Manual Course? [Course Questions] (6)
Ubuntu 20 + Python3 setup ( 2 3 ) [Drone Programming] (42)
Ubuntu 18.04.6 (course build); "Launch QGC with DK script part3" mode GUIDED loop hanging (launchSitl basic_template.py) [Drone Programming] (11)
Full gz sim on 22.04 LTS [Drone Talk] (11)
I am having trouble binding receiver (FS-X6B) with the RC Flysky FS-i6. The LED on the receiver never turns on [Drone Building] (2)
Couldn't run QGC [Drone Programming] (5)
Course cut off [Drone Programming] (7)
(Newbie) Aruco not showing in gazebo [Course Questions] (3)
Connect Raspberry pi 4 to Pixhawk 4 Mini [Drone Building] (6)
Copter: Changing YAW while in LOITER [Drone Talk] (2)
Need Help with Long-Range Video Streaming Setup [Drone Talk] (6)
Git submodule update --init --recursive [Drone Programming] (4)
Upgrading PIP / Using SUDO PIP [Drone Programming] (5)
Stm_vehicle.py stm_vehicle.py: command not found [Drone Programming] (4)
Please help me. I need information on Indoor Autonomous Flying [Drone Talk] (4)
Submodule update error [Drone Programming] (17)
Drone Rotates when we give vx and vy both [Course Questions] (3)
Some problem with sitl and dorne [Drone Programming] (3)
Problem with connect to pixhwak via jetson nano [Drone Talk] (1)
Tunning the PID's of Landing algorithm [Drone Programming] (7)
Unable to fly drone in AltHold using RC [Course Questions] (5)
Micro Pi Zero: Setup - Zadig not showing stm32 bl [Course Questions] (6)
Mini drone [Course Questions] (2)
Which drone should I buy? [Drone Talk] (8)
Sim_vehicle.py compilation fails_Something about GPS task [Drone Programming] (3)
Sudo -E echo "export courseRoot=/home/$USER/courseRoot" >> ~/.bashrc [Drone Programming] (2)