Install Optical Flow Sensor to Drone Frame

[hyosun]

Dear
I wonder how the PX4FLOW + I2C BUS is connected.
It is not visible in the video.
Please tell me the wire connection method in detail

Indoor Flying for GPS-less Flight

Setup Optical Flow Parameters in Mission Planner

Install Optical Flow Sensor to Drone Frame

Best Regards

[jax200]

I am unclear what you are asking since you are showing what is required in the photo and as described in the third video. In other words, one cable inserts from the I2C port of the Pixhawk into the splitter, another inserts from the splitter into the PX4FLOW.